Furniture cabinet hinge installation

1847

Published by
Jimmy at
November 01, 2018

By loosening the fixed screw on the hinge socket, slide the hinge arm before and after, with a 2.8mm adjustment range.The screw must be tightened again after adjusting.

1. Before and after adjustment of common hinge sets: through loosening the fixed screw on the hinge sets, slide the hinge arm before and after, with a 2.8mm adjustment range.The screw must be tightened again after adjusting.

2. Before and after adjustment of the cruciform quick setting hinge: this kind of cruciform quick setting hinge has an eccentric CAM driven by a screw. The rotating CAM can be adjusted within the range of -0.5mm to +2.8mm without loosening other fixed screws.

3. Before and after adjustment of the 1-type quick assembly hinge seat: this 1-type quick assembly hinge seat has an eccentric CAM driven by a screw. The rotating CAM can be adjusted within the range of -0.5mm to +2.8mm without loosening other fixed screws.

4. Door side adjustment: after the hinge is installed, the door side distance shall be 0.7mm before any adjustment is made.In this way, the adjusting screw on the hinge arm can be adjusted within the range of -0.5mm to +4.5mm.This parameter range is reduced to -0.15mm if the door hinge or narrow door frame hinge is used.